For the weather conditions you experience in Colorado, I'd recommend the Adco Olefin HD All-Climate + Wind RV Cover, part # AD47ZR. The top panel is constructed of Olefin HD fabric, which blocks harmful UV rays that can cause cracking and fading. It also beads water on contact, prevents dirt and dust particles from reaching trailer surface, eliminates black streaks and corrosion caused by air pollutants and rain and will extend down the front, back, and sides of cover for extra protection.
The... view full answer...
Based off of my research, it looks like your 2022 Forest River R-Pod 196 came equipped with a manual 2 step setup.
To find the correct replacement, you'd need to just measure the mounting bracket width and pick out a set that you like the most.
For instance, the Lippert Manual Pull-Out Step for RVs # LC432682 has a mounting bracket measurement of 25-1/2" wide x 9-3/4" tall x 12" deep, so if yours matches then this would work as a replacement.
If you let me know what you have, I'd be... view full answer...
To switch your 2022 Forest River R-Pod over to two propane tanks you'll need to start with the base. You can use the 20lb tank holder # 37220BL you were looking at or a 30lb tank holder # 37230BL. These can be bolted to the trailer tongue.
Once you have the holder in place and the tanks you can then install a dual-stage automatic changeover regulator like part # 37207-30395. You'll also want to pick up a mounting bracket # 37207-30405 to attach it to the tank holder. You can run pigtail... view full answer...
Yes, the Classic Accessories PolyPro III Deluxe RV Cover for R-Pod Trailers # CA80-197-171001-00 will work up to 17 foot long R-Pod Trailers, like your Forest River R-Pod. The cover has zippered panels on the rear and the passenger's side will give you easy access to the inside of your trailer. The cover has a 3 year warranty.
If you have any further questions please feel free to reach back out to me anytime and I will be more than happy to further assist you in your towing endeavors. view full answer...
As long as your trailer does not exceed 800 pounds, I recommend the 800-pound bars over the 1,000 pound bars. This is because you are right on the money when you conclude that the 1,000 pound trunnions with your trailer will be a stiff ride.
Since you say that you have an Fast Way e2 spring bar system, the upgraded bars you need are the Replacement Trunnion Spring Bars for Fastway e2 Weight Distribution Systems # FA92-01-0899. These bars are designed to fit your current Fastway e2 weight... view full answer...
From what I was able to find with my research, the 2021 R-Pod 202-80 has a length of 25 feet, so I recommend using the Adco SFS AquaShed Cover for Travel Trailer - Up to 26' Long - Gray # 290-52243. This Adco cover will fit well on your 25 foot trailer and provide you with good protection from the elements since it beads water on contact but is also breathable to keep mildew from forming on the coach. This cover also comes with a storage bag to keep the cover protected when it's not being... view full answer...
I have a solution for you. I recommend getting the Replacement 5" Monitor for Furrion Vision S Wireless RV Camera System # FR97FR so you can use multiple cameras in the future if you want. The 4 inch model only supports one camera.
You will need the Rear View Safety Extendable Monitor Mount - 5" to 7" Reach # RVS-1419 and the Replacement Furrion Monitor Power Cable # C-FOS07TAPK-006 to complete this setup. view full answer...
Looking at the setup of a 2017 Forest River R-Pod 182G, you won't be able to put anything on the rear of the trailer so your only real option is going to be on the trailer A-frame. I recommend using the Extra Offset Trailer Spare Tire Carrier by Dutton-Lainson # DL22145, because it can handle your 15" wheels and will fit on a variety of trailer frame sizes. You will want to confirm that your trailer's frame is no taller than 5" and thicker than 3" to ensure this will fit.
I've linked... view full answer...
For your 2022 Forest River R-Pod 153 you can use the Axle Riser Kit # LC382741 for a lift kit. This kit will add 3 1/2" of lift to your 3.5K torsion axle, and includes 2 axle riser channels as well as the mounting hardware. view full answer...
If you reach out to a local trailer shop they should be able to help you reinforce your bumper. Usually though the R-Pod will have a weight capacity for the bumper so if it's a higher weigh rating you should be good to go without a shop reinforcing anything.
For a bumper mounted hitch receiver I recommend the Curt # E-100 (if your bumper is a 4" x 4" bumper) and then a bike rack that can accommodate your e-bikes is the Swagman E-Spec Bike Rack # S94FR. This rack doesn't have a ramp but... view full answer...
Yes, the Thule Hideaway Awning # TH490011 is a direct bolt on awning that will mount directly to the side of your 2016 Forest River R-Pod Travel Trailer.
This awning measures in at 9' 10" Long, 8' Wide, includes all the needed hardware for installation, and will work great for your Forest River R-Pod trailer. view full answer...
Yes, both the Equal-i-zer Weight Dist Shank # EQ90-02-4600 and the Equal-i-zer Weight Dist Shank # EQ90-02-4500 will both work for your Fastway e2 Weight Distribution w/ 2-Point Sway Control # FA94-00-1000.
Both of these shanks are 18" long, and 9-1/2" tall, and have a maximum tongue weight capacity of 600-1,400-lbs.
The only difference being, is that # EQ90-02-4600 has a 8" rise, and 4" drop, and, # EQ90-02-4500 has a maximum rise of 7", and a drop of 3". view full answer...
It looks like the 2016 Forest River R-Pod Travel Trailers have space for a 10' awning. With that in mind, to add one to your R-Pod, you will need each of the following components:
For the awning itself, you can use part # LCV000211447. It measures 10' long and extends 8' out. It's a solid black fabric.
For the drive head, you can use part # LC272067.
For the idler head, you can use part # LC273479.
For the pull strap, you can use part # LC292794.
For the support arm, you can use part #... view full answer...
Go To Results